NEWS
MVE Absorptive SWITCH
Warning: Variable passed to each() is not an array or object in /home/newsca35/public_html/micro-mve.com/news_detail.php on line 99
DATE2016.04.20
Microwave switches can be either reflective or absorptive. In a reflective switch, the impedance of the port that is OFF will have a very high VSWR. The high VSWR indicates a loss of signal power resulting from the reflection caused at a discontinuity in a transmission line. A high reflection loss, however, will indicate that there is a low loss of power upon I.L of a device.On the other hand, an absorptive switch will have a low VSWR on each port, regardless of the switch mode. This indicates a minimum of power loss in the transmission line.
MVE absorptive switch provide high quality RF and Microwave Coaxial switches. These are available in SPDT, SP4T…SP8T.
• Impedance: 50 Ohm
• TTL Compatible driver include
• Low Insertion Loss / High Isolation
I
MVE absorptive switch provide high quality RF and Microwave Coaxial switches. These are available in SPDT, SP4T…SP8T.
• Impedance: 50 Ohm
• TTL Compatible driver include
• Low Insertion Loss / High Isolation
| MVE P/N | VSWR | Frequency | INSERTION LOSS |
ISOLATION MIN. |
RF INPUT POWER (CW) |
POWER DISSIPATION (CW) |
| MVE9220 | 1.8:1 | 5-8GHz | 2.2dB | 60dB | 1W | 0.3W |
| MVE9415 | 1.8:1 | 5-8GHz | 3.0dB | 60dB | 1W | 0.3W |
| MVE9221 | 1.5:1 | 2-8GHz | 1.5dB | 88dB | 1W | 0.35W |
| MVE9416 | 1.5:1 | 2-8GHz | 2.2dB | 85dB | 1W | 0.4W |
| MVE9814 | 2.0:1 | 0.02-18GHz | 6.0dB | 80dB | 1W | 0.3W |
